Laser Falcon methane detector mountings for DJI drones
Enterprise and agriculture models are quoted per configuration — payload, training and AMC included. We reply the same working day.
Not sure it's the right one? WhatsApp a drone expert or call +91 70225 26509
SPH Engineering mountings that fix the Laser Falcon methane detector on the leg of a DJI drone, for pipeline, oil and gas and landfill leak surveys. HobiTech supplies them in India as an authorised SPH Engineering partner.
Compatibility
| Holds | Laser Falcon methane detector |
| Fixing point | Leg of the DJI drone |
| Drones tagged by SPH | DJI M300 RTK, DJI M210, DJI M600 Pro |
| SPH part number | IS-ACCS-MTG-LFALCON-M300RTK |
What are the Laser Falcon mountings used for?
A laser methane detector must be held firmly on the drone so its beam points where the pilot expects. SPH Engineering makes these mountings to fix the Laser Falcon detector on the leg of a DJI drone, as part of its drone methane detection system. The sensor, the SkyHub onboard computer and the altimeter each have their own SPH mounting, so the whole payload goes on the aircraft without custom brackets.
SPH Engineering lists three main uses for its methane detection system:
- Oil and gas facility inspections
- Gas pipeline monitoring
- Landfill methane screening for regulatory compliance and leak localisation
Which drones do the mountings fit?
SPH Engineering's shop tags this mount for the DJI M300 RTK, DJI M210 and DJI M600 Pro, and its part number refers to the M300 RTK. SPH's methane detection page lists the DJI M300, M350 and M600 among the drones supported by the complete system, along with non-DJI aircraft such as the Inspired Flight IF1200A, Harris Aerial H6 and Wispr Ranger Pro. Leg sizes differ between models, so tell us your drone when you request a quote and we will confirm the fit with SPH before ordering.
| Drone | Tagged for this mount | Supported by SPH methane system |
|---|---|---|
| DJI M300 RTK | Yes | Yes |
| DJI M350 RTK | Confirm with us | Yes |
| DJI M600 Pro | Yes | Yes |
| DJI M210 | Yes | Not listed |
What else do you need for drone methane detection?
The mountings are one part of SPH Engineering's integrated methane system. A complete setup uses:
- The methane detector. HobiTech carries the Falcon Plus TDLAS methane detector. SPH lists a 25 ms response time and a minimal detectable flow rate of 1 g/h (approximately 500 ppm).
- The SkyHub onboard computer, which records methane readings with GPS coordinates, and its SkyHub mountings.
- The SkyHub software package for Methane detector, which adds SkyHub firmware and a UgCS companion app for the detector.
- The True Terrain Following package with a laser altimeter and its mount, so the drone holds a steady height over the terrain.
- A UgCS licence such as UgCS EXPERT. UgCS plans low-altitude flights and shows methane detections to the pilot in real time.
See the full methane detection range or SPH Engineering's methane detection technology page.
Why buy the Laser Falcon mountings from HobiTech?
HobiTech is an authorised SPH Engineering partner based in Bengaluru, India. Every order comes with a GST invoice, and our local team supports the sensor, the drone and the software. SPH's methane detection training courses are also available through HobiTech.
Frequently Asked Questions
What do the Laser Falcon mountings do?
They fix the Laser Falcon methane detector on the leg of a DJI drone, so the detector stays secure and pointed correctly during a survey.
Which DJI drones are they for?
SPH tags the mount for the DJI M300 RTK, M210 and M600 Pro. For any other model, including the M350 RTK, ask HobiTech to confirm the fit first.
Are the detector and SkyHub included?
No. This listing is the mountings only. The detector, SkyHub, software and altimeter are sold separately.
Do I need SkyHub to use the Laser Falcon on a drone?
Yes. In SPH's system, SkyHub records the methane readings together with precise GPS coordinates, and UgCS shows detections to the pilot.
Is setup help available for the full system?
SPH Engineering offers assembly and testing of the integrated system, with up to 8 hours of expert support, remotely or at SPH's office.
How do I buy the Laser Falcon methane detector mountings in India?
Use Request a quote on this page, or call HobiTech on +91 70225 26509. We confirm the price and configuration, and every order comes with a GST invoice.